TruAudio LEA Connect Series 352 2-Channel Amplifier 350w 70v / 100v

LEA-CONNECT352

Features

Web Browser-based UI works on any device with no software to download
Direct LoZ and HiZ (70V or 100V) selectable per channel
Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel
3 Ways to Connect 1.) Built in WiFi Access Point 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection
96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
Universal Switch Mode Power Supply with PFC. Operation from 100VAC – 240VAC +/-15%
Analog fully routable inputs
External I/O Port for Remote On/Off and fault monitoring
Highly Efficient Class D Output Stage for low AC Current draw

Specs

Output Power: 2 x 350 WRMS Per Channel @ 4Ω, 8Ω, 70V, 100V (175W at 2Ω) | 230 Watts @ 25V
Inputs: 4 Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
THD+N: 0.1% (20Hz to 20kHz)
Frequency Response: +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level: 105dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk: 70dB (20Hz to 20kHz)
I/O Latency: 1 ms DSP latency under any condition
Load Impedance: LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DSP Architecture: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
Input Matrix: Routable matrix; any input to any output with primary and secondary input priority
Crossovers: Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) and Bessel
Parametric EQ: 8 Band Parametric EQ per channel
Output Delay: 100ms per channel
Output Protection: DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection
Network Connectivity: Wi-Fi or 100MB Ethernet with PoE or Built in Wi-Fi Access Point (IEEE 802.11 b/g/n WPA, WPA2, WEP)
Operating Systems: MAC, iOS, PC, Android

Dimensions

What’s in the box