Lutron 4-scene with raise / lower(white)

RRD-W4S-WH

Overview

Power: 120 V~ 50/60 Hz 0.5 A
Typical Power Consumption: 0.6 W, Test Conditions: all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 120 V~
Regulatory Approvals: UL, CSA, NOM, FCC, IC, COFETEL, ANATEL
Environment: Ambient operating temperature: 32°F to 104°F (0°C to 40°C), 0% to 90% humidity, non-condensing. Indoor use only.
Communications: Wall-mount designer keypads communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
ESD Protection: Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection: Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure: Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored.
Mounting: Requries a U.S. wallbox. 3 1/2 in (89 mm) deep recommended, 2 1/4 in (57 mm) deep minimum.
Wiring: Wall-mount designer keypads require a neutral wire connection.
Color: White

Design Features:

At the press of a single button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions.
Light levels and shade/drapery positions can be fine-tuned by pressing and holding the raise/lower buttons.
Programmable to select scene or room preset levels or positions.
Adjustable backlight intensity.