Lutron Sivoia QS 10-Output Configurable Smart Panel - No Power Modules

QSPS-10PNL-NPM

Features

Plug-in ready for up to two 5-output power supply modules, model WIN-PS-5CC-R (sold separately)
Ten NEC Class 2/PELV outputs (when populated with two 5-output power supply modules, model WIN-PS-5CC-R), capable of operating Lutron Sivoia QS shades, drapery drive units, keypads & accessories
No replaceable fuses required for overload/miswire protection
Simple wiring topology to connect QS communication between shades and other system components
Smart diagnostics verify system communication and reduce installation time
Easy system testing with manual override buttons for shades and lighting
May be surface mounted or recess mounted at a location within allowable distance to powered devices, limited by wire gauge used

Specs

Input: 120-240 V~ 50/60 Hz 10 A
Output (with WIN-PS-5CC-R installed)
- Each output: 35 V- 143 mA 5 W
- Each output is capable of powering one Sivoia QS shade or drapery drive unit, OR up to 8 QS PDUs
Input Wiring
- 14 AWG-10 AWG (2.5 mm2 -4.0 mm2 ) single wire, solid or stranded
- Torque terminal screws to: 5 in-lbs (0.5 N•m)
- Strip length: 5 ⁄16 in (8 mm)
- Maximum 1 panel per 15 A circuit breaker (limiting factor is inrush current; in some countries, a 16 A circuit breaker will be suitable)
- Maximum 2 panels per 20 A circuit breaker (limiting factor is inrush current)
Output Wiring
- 22 AWG–12 AWG (0.5 mm2 -4.0 mm2 ) single wire, solid or stranded (wire gauge affects allowable length of run; see Wiring Rules)
- Torque terminal screws to: 5 in-lbs (0.5 N•m)
- Strip length: 1 ⁄4 in (6 mm)
- Ten (10) output terminal blocks for shade power/communication (4-conductor)
- Two (2) link terminal blocks for communication pass-through (3-conductor)

Dimensions

What’s in the box