KICKER K-SERIES 4AWG AMP KIT W / 2CH INTERCONNECTS; RoHS COMP

— Kicker products can only ship from your local warehouse —

• Kicker's CK4 amp wiring kit includes the power, ground, turn-on, and signal wiring for any amplifier with a fuse rating of up to 100 amperes
• Suitable for an amplifier or amp system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps
• Kit provides a 16.4 foot, 2 channel twisted pair patch cable that will send the signal reliably from the receiver to your amp with minimal noise
• Includes 12 feet of 12 gauge speaker wire, enough to handle a few speakers or subs in most installations
• Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference 

• Amplifier wiring kit
• Cables meet or exceed the American Wire Gauge specifications and requirements
• 17 feet of 4-gauge blue power cable with attached ring terminal and protective wire loom
• 4 feet of 4-gauge gray ground cable with attached ring terminal
• 17 feet of 16-gauge clear turn-on lead wire
• 16.4-foot 2-channel twisted pair RCA patch cable
• 12 feet of 12-gauge speaker wire
• AFS fuse holder and 100-amp fuse
• Assortment of wire termination hardware and cable ties

• 17' Length of 4-gauge blue power wire (ring terminal on one end)
• 4' Length of 4-gauge gray ground wire (ring terminal on one end)
• 17' Length of 16-gauge silver remote wire
• 16.4' 2-channel RCA patch cable
• 12' Length of 12-gauge speaker wire
• FHS fuse holder with 100-amp AFS fuse installed
• 4-Gauge firewall grommet
• Six 6" wire ties
• Self-tapping hex-head bolt
• Flat washer
• Four 12-gauge fork terminals (with 2 blue and 2 black terminal boots)
• 18-22 Gauge butt connector