KICKER K-SERIES 8AWG AMP KIT W / 2CH INTERCONNECTS; RoHS COMP

— Kicker products can only ship from your local warehouse —

• To get optimal power from your amplifier you will need power and ground wiring. Kickers amp wiring kit includes power, ground, turn on, and signal wiring for any amplifier with a fuse rating of up to 60 amperes
• Works with an amp system or amplifier with a total output of around 400 watts RMS for Class AB amps or about 600 watts RMS for Class D amps 
• This kit comes with a 16.4 foot, 2 channel twisted pair patch cable this cable will send a reliable signal from the receiver to your amp with little noise 
• Includes 12 feet of 12 gauge speaker wire which could be used for a few installations 
• Kicker makes their wires from oxygen free copper for intense power and signal transfer with minimal resistance or interference 

• 17 feet of 8-gauge blue power cable with attached ring terminal and protective wire loom
• 4 feet of 8-gauge gray ground cable with attached ring terminal
• 17 feet of 16-gauge clear turn-on lead wire
• 16.4-foot 2-channel twisted pair RCA patch cable
• 12 feet of 12-gauge speaker wire
• AFS fuse holder and 60-amp fuse
• Assortment of wire termination hardware and cable ties

• 17' Length of 8-gauge blue power wire (ring terminal on one end)
• 4' Length of 8-gauge gray ground wire (ring terminal on one end)
• 17' Length of 16-gauge silver remote wire
• 16.4' 2-channel RCA patch cable
• 12' Length of 12-gauge speaker wire
• FHS fuse holder with 60-amp AFS fuse installed
• 8-Gauge firewall grommet
• Six 6" wire ties
• Self-tapping hex-head bolt
• Flat washer
• Four 12-gauge fork terminals (with 2 blue and 2 black terminal boots)
• 18-22 Gauge butt connector