AVPro 24X 10G Copper (PoE++) Stackable Managed Switch with Six 10G / 25G SFP28

• Processing Performance-680Gbps calculated switching capacity combined with a forwarding rate of 480Mpps
• Virtual Switch Framework-Synthesizes multiple AC-MXNET-10G-SW24C switches in the same layer into one logical device for high availability and scalability 
• Carrier-Grade Build Rating-Provides 99.999% uptime availability 
• Fast Switching with Near-Zero Latency-Source-to-source switching to endpoints is virtually instantaneous if scaling is not required. With scaling in use, the switching speed is between one to two frames, or about 17-34 milliseconds, considered visually imperceptible
• Preconfigured Comprehensive QoS-Quality of Service settings are optimized for Dante and SDVoE streams
• Dante Audio Prioritized-Dante-oriented QoS traffic prioritization to enhance network streaming performance in residential and commercial environments
• Class-Leading Performance-MXnet switches are the highest-performing switches in the AVoIP market segment 

• Ethernet: (24) x 10G-mGig RJ45 ports / RJ-45 ports 1 through 8: POE++ Up to 60 watts / RJ-45 Ports 9-24: POE+ Up to 30 watts / (2) QSFP + 40G Ports / (1) x 10/100/1000BASE-T Management Port (MGMT)
• RS232: (1) x RJ45 console port (out-of-band) (9600 baudrate)
• USB: (1) x USB 2.0 Type-A for MXNet service and storage
• Ethernet Distance: 330 feet over CAT 6a
• SFP+ and Fiber: 10G SFP+ AOC cable up to 3 meters, 10G SFP+ multimode transceiver over multimode fiber up to 550 meters 10G SFP+ single mode transceiver over single mode fiber up to 20 kilometers
• Max SDVoE Endpoints: 24 (32 with QSFP+ 4x10G Hardware Profile Mode)
• Switching Capacity: 680Gbps
• Forwarding Rate: 480Mpps
• MAC Address: 32K
• Routing Table: 16K
• Jumbo Frame: 
• L3 Interface: 1K
• Max Power Consumption: 530W (1060W if using dual power supply) (2nd PSU not included)
• POE Power: IEEE 802.3af (POE 15.4W) / IEEE 802.3at (POE + 30W) / IEEE 802.3bt (POE++60W) (only ports 1-8) / Total POE power budget: 1000W
• Thermal Dissipation: 1812.176 BTU/hr
• Power Supply Unit: AC-100~240VAC, 50~60Hz / DC-Input 48V-57V / Up to two modular hot-swappable AC power supply units (only one PSU included with purchase)
• Mounting: Rack Mount

• Size (Single Unit): 1.73” x 17.32” x 14.96”
• Shipping Size: 5.375” x 18.25” x 22”
• Unit Weight: 12 lbs.
• Shipping Weight: 16 lbs.

• Network Switch
• Power Cable
• Rack screws and nuts
• Rack mount ears and screws
• Rubber feet
• Grounding wire
• Serial to RJ45 cable 

Special Order Only