AudioControl Director Series 8 Channel Matrix-Amplifier 100w

• Network DHCP Signal Matrix Amplifier With Volume Control
• 8 Channels x 100 Watts at 8 Ohms (All Channels Driven)
• 8 Channels x 200 Watts at 4 Ohms (All Channels Driven)
• Bridgeable to 400 Watts of Bridged Power
• Digital Signal Processing (DSP) Performance
• Built-In Speaker Optimization Profiles
• Ethernet Port for Status Monitoring, Source Switching and 12 Volt Trigger Control
• Built in Matrix Delivering Analog or two digital inputs to be routed to any zone output on single or multiple amplifiers
• Network Programmable Graphic & Parametric Equalization with User Memories
• Assignable Names for All Zones & Amplifier
• Digital Signal Sense
• Programmable Electronic Crossover for Local Subwoofer Applications; Subsonic Filter
• AudioControl LightDrive Anti-Clipping Speaker Protection
• 4 Stereo Local Inputs plus 4 Digital Local Inputs
• Dual Digital Audio Bus Inputs
• Compact 1U Rack Space (Includes Rack Mount Brackets)
• Home and Commercial Installations

• Inputs: 4 Stereo Local Inputs, 4 Digital S/PDIF and Toslink Inputs
• Input Sensitivity: 1 Vrms for full output, level at maximum
• Input Gain: 30 dB
• Amplifier Channels: 8
• Power Output (8Ω): 100W per channel
• Power Output (4Ω): 200W per channel
• Power Output (8Ω Bridged Mono): 400W
• Minimum Speaker Load: 4Ω
• Preamp Audio Outputs: 2 Digital S/PDIF Outputs
• Crosstalk: > 80 dB @ 1 kHz
• Damping Factor: >300
• Signal to Noise: >97 dB, A-wtd, ref full output
• Crosstalk: >80 dB @ 1 kHz
• DAC Specifications: 32 – 96 kHz sample rate, 16/24 bit depth

• Size (W x D x H): 17” x 15.8” x 1.75”
• Weight: 14.7 lb.

• The Director Model M4800
• Speaker Connectors
• Remote Connector
• Power Cord
• Manual
• Warranty

Special Order Only