AudioControl 4 Channel High Power Dual Mode 70 Volt DSP Amp

CM4-750-D

Features

Network DHCP signal matrix amplifier with volume control
Optional dante port
4 channels x 750 watts at 70/100 V or 2Ω/4Ω (all channels driven)
4 channels x 625 watts at 8Ω (all channels driven)
1500 watts of bridged power at 70/100 V or 4Ω/8Ω
Digital Signal Processing (DSP) Performance
Built-in speaker optimization profiles
Ethernet port for status monitoring, source switching and 12 volt trigger control
Built in matrix delivering analog or digital inputs to be routed to any zone or digital bus output
Network programmable graphic and parametric equalization with user memories
Assignable names for all zones and amplifier
Digital signal sense
Programmable electronic crossover for local subwoofer applications; subsonic filter
AudioControl LightDrive Anti-Clipping speaker protection
Digital and analog inputs with digital and analog pass thru / loop outputs
Dual digital audio bus outputs
Commercial and home installations

Specs

Inputs: 8 balanced inputs, 8 unbalanced RCA inputs, 2 digital combo coax/toslink inputs
Input Sensitivity: 1 Vrms for full output, level at maximum
Input Gain: 30 dB
Amplifier Channels: 4
Power Output (70 V / 100 V): 750W per channel
Power Output (70 V / 100 V Bridged): 1500W
Power Output (8Ω/4Ω): 625W per channel
Power Output (8Ω Bridged): 1250W
Minimum Speaker Load: 2Ω
Preamp Audio Outputs: 4 balanced, 4 unbalanced RCA, 4 digital coax loop outputs
Remote Power Trigger: +12 VDC or Dry Contact Closure
Network Connection/Protocol: 10BaseT Ethernet TCP/IP
Communication Protocol: HTTP or Telnet

Dimensions

What’s in the Box